Wheel Name | Description | Bobbin Dimensions | |
1920 Wheel | Has a few special features. | 1-60 2-73 3-62 4-20 5-102 H-8 S- |
|
Antique Norwegian Double Table | | 1-59 2-75 3-63 4-12 5-104 H-8 S-Rounded End Nub 2 |
|
Antique Wheel 01 | | 1-67 2-74 3-65 4-9 5-76 H-8 S- |
|
Antique Wheel 02 | | 1-67 2-85 3-60 4-15 5-100 H-15 S-Hole: 10,8 |
|
Antique Wheel 03 | | 1-55 2-76 3-63 4-15 5-98 H-8 S-Whorl 9.5 |
|
Antique Wheel 05 | | 1-70 2-70 3-70 4-10 5-114 H-5 S-Round End |
|
Antique Wheel 06 | | 1-70 2-70 3-60 4-13 5-124 H-5 S-Round End |
|
Antique Wheel 07 | | 1-41 2-64 3-64 4-10 5-108 H-7 S- |
|
Antique Wheel 08 | | 1-53 2-104 3-86 4-21 5-124 H-7 S- |
|
Antique Wheel 09 | | 1-77 2-81 3-71 4-20 5-124 H-8 S-Round End |
|
Antique Wheel 10 | Double Drive | 1-49 2-76 3-69 4-16 5-108 H-7 S- |
|
Antique Wheel 100 | | 1-73 2-85 3-85 4-20 5-120 H-5 S-Round End |
|
Antique Wheel 101 | | 1-32 2-80 3-50 4-15 5-107 H-6 S-Round end |
|
Antique Wheel 102 | | 1-50 2-100 3-55 4-15 5-130 H-7 S-Holes 7,9 Tcone End |
|
Antique Wheel 103 | | 1-38 2-70 3-50 4-16 5-110 H-7 S-Cone End |
|
Antique Wheel 104 | | 1-25 2-83 3-54 4-14 5-118 H-7 S-Cone |
|
Antique Wheel 106 | | 1-45 2-60 3-55 4-18 5-117 H-6 S-Cone end |
|
Antique Wheel 107 | | 1-27 2-88 3-59 4-15 5-114 H-7 S-Cone |
|
Antique Wheel 108 | | 1-49 2-87 3-55 4-19 5-100 H-9 S-Cone |
|
Antique Wheel 109 | Mary | 1-56 2-95 3-69 4-14 5-123 H-7 S-Round End, Nubb=5 |
|
Antique Wheel 11 | | 1-38 2-70 3-59 4-19 5-105 H-8 S- |
|
Antique Wheel 110 | Alice | 1-55 2-95 3-58 4-15 5-107 H-7 S-TCone End |
|
Antique Wheel 111 | | 1-45 2-87 3-64 4-19 5-119 H-7 S-Cone |
|
Antique Wheel 112 | | 1-60 2-63 3-60 4-13 5-99 H-7 S-Round End |
|
Antique Wheel 113 | | 1-26 2-76 3-50 4-13 5-114 H-6 S-Cone End |
|
Antique Wheel 114 | | 1-50 2-86 3-62 4-13 5-119 H-7 S-Cone End |
|
Antique Wheel 115 | | 1-41 2-80 3-60 4-15 5-112 H-8 S-Cone End |
|
Antique Wheel 116 | | 1-66 2-77 3-63 4-13 5-107 H-9 S-Hole: 7,8 Round End |
|
Antique Wheel 117 | | 1-56 2-108 3-60 4-16 5-100 H-6 S-Round |
|
Antique Wheel 118 | | 1-45 2-83 3-63 4-19 5-119 H-8 S-Cone |
|
Antique Wheel 119 | | 1-42 2-53 3-53 4-13 5-97 H-7 S-Cone |
|
Antique Wheel 12 | (Antique Traditional) | 1-70 2-60 3-117 4-0 5-0 H-7 S-Nub=3 (Whorl) Nub=1 (Orifice), no groove on orifice end |
|
Antique Wheel 120 | | 1-40 2-60 3-75 4-101 5-0 H-0 S-Right / Last diagram |
|
Antique Wheel 121 | | 1-73 2-102 3-75 4-24 5-105 H-7 S-Cone |
|
Antique Wheel 122 | | 1-41 2-72 3-61 4-14 5-110 H-7 S-Cone |
|
Antique Wheel 123 | | 1-38 2-80 3-62 4-15 5-110 H-8 S-Round End |
|
Antique Wheel 124 | | 1-45 2-66 3-61 4-10 5-92 H-7 S-Round End with Nub=4 |
|
Antique Wheel 125 | | 1-48 2-68 3-60 4-19 5-111 H-8 S-Round End |
|
Antique Wheel 126 | | 1-33 2-80 3-50 4-13 5-101 H-5 S-Cone End |
|
Antique Wheel 127 | | 1-32 2-75 3-51 4-15 5-122 H-7 S-Cone End |
|
Antique Wheel 128 | | 1-67 2-86 3-67 4-146 5-0 H-7 S-2 Whorls |
|
Antique Wheel 129 | | 1-50 2-83 3-70 4-17 5-122 H-9 S-Cone End |
|
Antique Wheel 13 | | 1-50 2-88 3-65 4-16 5-110 H-7 S- |
|
Antique Wheel 130 | | 1-44 2-100 3-60 4-15 5-120 H-6 S-Round End, Nub=2 |
|
Antique Wheel 131 | | 1-52 2-73 3-68 4-12 5-89 H-7 S-Round End |
|
Antique Wheel 132 | | 1-53 2-92 3-62 4-15 5-105 H-8 S-Round End, Nub=3 |
|
Antique Wheel 133 | | 1-56 2-79 3-59 4-15 5-116 H-7 S-Cone, Nub=4 |
|
Antique Wheel 134 | | 1-38 2-57 3-51 4-9 5-98 H-7 S-Round End, Nub 4 |
|
Antique Wheel 135 | | 1-35 2-55 3-50 4-10 5-97 H-8 S-Round End |
|
Antique Wheel 136 | | 1-53 2-66 3-55 4-10 5-95 H-9 S-Round End |
|
Antique Wheel 137 | | 1-45 2-61 3-53 4-15 5-109 H-6 S-Cone End |
|
Antique Wheel 138 | | 1-50 2-95 3-69 4-19 5-107 H-10 S-Cone End |
|
Antique Wheel 139 | | 1-130 2-130 3-76 4-17 5-123 H-10 S-Round End |
|
Antique Wheel 14 | | 1-57 2-75 3-54 4-21 5-102 H-7 S- |
|
Antique Wheel 140 | | 1-52 2-60 3-46 4-15 5-89 H-7 S-Round End, Hole1=7, Hole2=7.4 |
|
Antique Wheel 141 | | 1-76 2-76 3-76 4-19 5-122 H-10 S-Round End |
|
Antique Wheel 142 | | 1-32 2-57 3-56 4-13 5-95 H-7 S-Cone End |
|
Antique Wheel 143 | | 1-54 2-54 3-53 4-19 5-107 H-9 S-Round End, Nub=2 |
|
Antique Wheel 144 | | 1-36 2-67 3-60 4-16 5-108 H-7 S-Cone End Hole 9.5, Orifice End 7 |
|
Antique Wheel 145 | | 1-63 2-75 3-70 4-16 5-110 H-8 S-Round End, Nub 0 |
|
Antique Wheel 146 | | 1-50 2-69 3-68 4-16 5-151 H-10 S-Round End |
|
Antique Wheel 147 | | 1-57 2-67 3-62 4-10 5-98 H-8 S-Round End |
|
Antique Wheel 148 | | 1-51 2-88 3-66 4-23 5-114 H-7 S-Cone End |
|
Antique Wheel 149 | | 1-44 2-79 3-55 4-15 5-106 H-10 S-Round End |
|
Antique Wheel 150 | | 1-53 2-77 3-59 4-13 5-95 H-8 S-Cone End |
|
Antique Wheel 151 | | 1-49 2-63 3-54 4-13 5-107 H-9 S-Round End |
|
Antique Wheel 152 | | 1-33 2-80 3-55 4-20 5-110 H-6 S-Cone End |
|
Antique Wheel 153 | | 1-77 2-77 3-106 4-0 5-0 H-7 S-Nub L=4 D=40 |
|
Antique Wheel 154 | | 1-40 2-56 3-50 4-16 5-100 H-7 S-Round End |
|
Antique Wheel 155 | | 1-55 2-68 3-68 4-20 5-74 H-7 S-Round End |
|
Antique Wheel 156 | | 1-42 2-70 3-45 4-16 5-95 H-7 S-Cone End Hole=6.5,5.5 |
|
Antique Wheel 157 | | 1-47 2-76 3-63 4-13 5-104 H-8 S-Round End |
|
Antique Wheel 158 | | 1-50 2-90 3-71 4-20 5-117 H-7 S-Cone, H1=6, H2=6.8 |
|
Antique Wheel 159 | | 1-42 2-68 3-61 4-14 5-105 H-7 S-Cone End |
|
Antique Wheel 16 | Antique Wheel | 1-55 2-70 3-70 4-16 5-115 H-7 S-Nub 5 |
|
Antique Wheel 160 | | 1-47 2-67 3-67 4-13 5-96 H-6 S-Round End |
|
Antique Wheel 161 | | 1-50 2-63 3-57 4-19 5-127 H-8 S-Round End |
|
Antique Wheel 162 | | 1-33 2-55 3-52 4-9 5-85 H-7 S-Cone End |
|
Antique Wheel 163 | | 1-32 2-100 3-65 4-12 5-120 H-8 S-Cone End |
|
Antique Wheel 164 | | 1-40 2-85 3-63 4-18 5-120 H-7 S-Holes=7,8 |
|
Antique Wheel 165 | | 1-73 2-76 3-50 4-12 5-101 H-7 S-Round End |
|
Antique Wheel 17 | Orifice end is a bit different | 1-56 2-80 3-80 4-13 5-111 H-6 S- |
|
Antique Wheel 18 | | 1-40 2-90 3-60 4-16 5-90 H-7 S- |
|
Antique Wheel 19 | | 1-41 2-88 3-55 4-25 5-117 H-6 S- |
|
Antique Wheel 20 | | 1-61 2-82 3-74 4-14 5-117 H-10 S- |
|
Antique Wheel 21 | | 1-43 2-68 3-50 4-20 5-109 H-7 S-Special Ends |
|
Antique Wheel 23 | | 1-60 2-74 3-54 4-20 5-102 H-7 S-Special Ends |
|
Antique Wheel 24 | Norwegian wheel | 1-62 2-67 3-61 4-15 5-87 H-8 S-Round Top |
|
Antique Wheel 25 | | 1-53 2-75 3-79 4-15 5-110 H-7 S-Round End |
|
Antique Wheel 26 | | 1-36 2-82 3-70 4-32 5-133 H-7 S- |
|
Antique Wheel 27 | | 1-54 2-66 3-57 4-15 5-88 H-7 S- |
|
Antique Wheel 28 | | 1-36 2-65 3-50 4-22 5-111 H-7 S- |
|
Antique Wheel 31 | 3 Whorls | 1-0 2-86 3-80 4-13 5-146 H-7 S-M1=86,67,49 Round end |
|
Antique Wheel 32 | | 1-63 2-90 3-74 4-19 5-109 H-8 S- |
|
Antique Wheel 33 | | 1-58 2-80 3-68 4-16 5-98 H-7 S-Round End |
|
Antique Wheel 34 | | 1-46 2-56 3-48 4-11 5-92 H-8 S-Round End |
|
Antique Wheel 35 | | 1-58 2-71 3-65 4-12 5-100 H-7 S-Round End, with Nub-2 |
|
Antique Wheel 36 | | 1-54 2-76 3-70 4-19 5-100 H-8 S-Round |
|
Antique Wheel 37 | | 1-47 2-79 3-53 4-15 5-98 H-7 S-Round End |
|
Antique Wheel 38 | | 1-58 2-71 3-65 4-13 5-100 H-6 S-Round End Nub 3 |
|
Antique Wheel 39 | | 1-53 2-77 3-77 4-13 5-102 H-10 S- |
|
Antique Wheel 40 | | 1-51 2-64 3-51 4-16 5-105 H-7 S-Cone End |
|
Antique Wheel 41 | | 1-35 2-75 3-75 4-15 5-146 H-7 S-Nub2, Round End |
|
Antique Wheel 42 | | 1-64 2-64 3-58 4-18 5-117 H-8 S-Round End, Nub 2 |
|
Antique Wheel 43 | | 1-40 2-80 3-68 4-19 5-95 H-7 S- |
|
Antique Wheel 44 | | 1-47 2-84 3-58 4-11 5-128 H-7 S-Cone |
|
Antique Wheel 45 | | 1-50 2-60 3-59 4-14 5-108 H-8 S- |
|
Antique Wheel 46 | CPW | 1-45 2-80 3-70 4-17 5-120 H-7 S-Round, Nub 3 |
|
Antique Wheel 47 | Midway / Hallcraft 2710 / Jacob Plum Wheel | 1-67 2-67 3-67 4-20 5-120 H-6 S-WhorlH=20, WhorlD=43, Round, Nub1 |
|
Antique Wheel 48 | | 1-44 2-78 3-56 4-14 5-100 H-7 S-Cone, Nub 4 |
|
Antique Wheel 49 | | 1-51 2-64 3-51 4-22 5-106 H-7 S-Whorl: 51,30,64 WH:15 |
|
Antique Wheel 50 | | 1-54 2-58 3-56 4-20 5-130 H-7 S-2 Whorls. Inside 53,46 Nub 4.5 Round |
|
Antique Wheel 51 | | 1-75 2-80 3-69 4-17 5-89 H-8 S- |
|
Antique Wheel 52 | | 1-60 2-65 3-58 4-10 5-90 H-6 S-w=10,nub=3, round |
|
Antique Wheel 53 | | 1-46 2-52 3-49 4-10 5-86 H-7 S-Cone |
|
Antique Wheel 54 | | 1-41 2-83 3-64 4-16 5-121 H-7 S- |
|
Antique Wheel 55 | | 1-53 2-58 3-57 4-20 5-94 H-7 S-Round |
|
Antique Wheel 56 | Custom with 2 whorls | 1-60 2-100 3-63 4-19 5-100 H-10 S-Whorl1=60 Whorl2=40 |
|
Antique Wheel 57 | | 1-70 2-80 3-60 4-13 5-110 H-7 S-Round |
|
Antique Wheel 58 | | 1-44 2-55 3-52 4-13 5-98 H-7 S-Round End |
|
Antique Wheel 59 | | 1-49 2-90 3-65 4-25 5-120 H-7 S- |
|
Antique Wheel 60 | | 1-64 2-72 3-56 4-18 5-120 H-7 S-Cone |
|
Antique Wheel 61 | | 1-41 2-41 3-38 4-10 5-101 H-7 S-Round |
|
Antique Wheel 62 | | 1-66 2-79 3-63 4-13 5-85 H-12 S-Round End |
|
Antique Wheel 63 | | 1-39 2-83 3-60 4-12 5-122 H-8 S-Round End, Orifice End Hole 8, Whorl End Hole 7 |
|
Antique Wheel 64 | | 1-50 2-75 3-60 4-20 5-108 H-6 S-Round End |
|
Antique Wheel 65 | | 1-30 2-60 3-50 4-15 5-95 H-9 S-Round End |
|
Antique Wheel 66 | | 1-47 2-70 3-70 4-20 5-130 H-5 S-Round End |
|
Antique Wheel 67 | | 1-41 2-70 3-70 4-20 5-130 H-5 S-Round End, Whorl: 70,41,70 WH:22 |
|
Antique Wheel 68 | | 1-41 2-83 3-56 4-19 5-114 H-8 S-Whorl (41,13,82.5,h19) Cone |
|
Antique Wheel 69 | | 1-41 2-88 3-63 4-15 5-111 H-8 S-Cone |
|
Antique Wheel 70 | | 1-70 2-70 3-75 4-10 5-105 H-10 S-Round |
|
Antique Wheel 71 | | 1-46 2-73 3-60 4-18 5-122 H-9 S-Cone |
|
Antique Wheel 72 | | 1-44 2-57 3-57 4-16 5-120 H-7 S-Round End |
|
Antique Wheel 73 | | 1-61 2-61 3-56 4-13 5-90 H-6 S-Round End |
|
Antique Wheel 74 | | 1-56 2-75 3-60 4-19 5-106 H-7 S-Cone |
|
Antique Wheel 75 | | 1-45 2-65 3-55 4-15 5-105 H-5 S-Cone End |
|
Antique Wheel 76 | | 1-38 2-70 3-57 4-19 5-114 H-8 S-Cone End |
|
Antique Wheel 77 | | 1-46 2-91 3-64 4-19 5-116 H-8 S-Cone |
|
Antique Wheel 78 | | 1-47 2-84 3-65 4-23 5-125 H-7 S-Cone End #2 |
|
Antique Wheel 79 | | 1-51 2-76 3-44 4-10 5-102 H-7 S-Round End |
|
Antique Wheel 80 | | 1-55 2-83 3-57 4-13 5-105 H-7 S-Cone End |
|
Antique Wheel 81 | | 1-55 2-90 3-64 4-18 5-109 H-9 S-Cone End |
|
Antique Wheel 82 | | 1-40 2-86 3-67 4-13 5-115 H-8 S-Cone End |
|
Antique Wheel 83 | | 1-36 2-80 3-58 4-19 5-105 H-8 S-Cone End |
|
Antique Wheel 84 | | 1-44 2-67 3-51 4-18 5-98 H-8 S-Cone End |
|
Antique Wheel 85 | | 1-54 2-72 3-58 4-14 5-97 H-9 S-Round End |
|
Antique Wheel 86 | | 1-41 2-76 3-54 4-13 5-111 H-8 S-Round End |
|
Antique Wheel 87 | | 1-88 2-88 3-178 4-0 5-0 H-7 S- |
|
Antique Wheel 88 | | 1-55 2-76 3-49 4-13 5-114 H-8 S-Cone End |
|
Antique Wheel 89 | | 1-35 2-75 3-55 4-16 5-92 H-6 S- |
|
Antique Wheel 90 | | 1-38 2-49 3-47 4-12 5-94 H-6 S- |
|
Antique Wheel 91 | | 1-54 2-72 3-72 4-20 5-100 H-6 S-2 whorls 54, 46 Round End, Nub 4 |
|
Antique Wheel 92 | | 1-55 2-80 3-55 4-19 5-113 H-7 S- |
|
Antique Wheel 93 | | 1-50 2-67 3-48 4-14 5-112 H-10 S- |
|
Antique Wheel 94 | Cassie | 1-46 2-94 3-69 4-19 5-111 H-6 S-H1=5.8, H2=7, Cone |
|
Antique Wheel 95 | Amelia | 1-40 2-54 3-50 4-13 5-100 H-6 S-H1=6.3, H2=6.6 Cone |
|
Antique Wheel 96 | | 1-38 2-56 3-55 4-10 5-111 H-7 S-Cone End |
|
Antique Wheel 97 | | 1-55 2-55 3-156 4-0 5-0 H-7 S- |
|
Antique Wheel 98 | | 1-60 2-60 3-60 4-20 5-98 H-7 S-Round End |
|
Antique Wheel 99 | | 1-100 2-100 3-110 4-0 5-0 H-6 S- |
|
Ashford | Traveler MK2 | 1-75 2-63 3-114 4-0 5-0 H-7 S-Nub 3,3 |
|
Ashford | Unknown Wheel | 1-55 2-65 3-100 4-0 5-0 H-7 S- |
|
Ashford | Jumbo | 1-110 2-110 3-115 4-0 5-0 H-7 S-Left Diagram |
|
Ashford | Woolee Winder | 1-76 2-76 3-130 4-0 5-0 H-8 S- |
|
Ashford | Scholar Mark 1 (1984-1987) | 1-98 2-73 3-167 4-0 5-0 H-7 S- |
|
Ashford | Scholar Mark 1 (1988) | 1-93 2-74 3-115 4-0 5-0 H-8 S- |
|
Ashford | Sliding Hook | 1-90 2-90 3-115 4-0 5-0 H-7 S-Left Measurement Diagram |
|
Ashford | Country Spinner 2 (Large Bobbin) | 1-193 2-193 3-292 4-0 5-0 H-10 S-whorls 160,150,140 |
|
Ashford | Double Drive Standard | 1-42 2-70 3-63 4-115 5-0 H-7 S- |
|
Ashford | Kiwi Super Bobbin | 1-146 2-146 3-160 4-0 5-0 H-7 S- |
|
Ashford | Single Drive Standard | 1-75 2-60 3-115 4-0 5-0 H-7 S- |
|
Babe | Babe Standard Bobbin | 1-92 2-70 3-121 4-0 5-0 H-10 S- |
|
Big Finnish | | 1-53 2-81 3-61 4-13 5-96 H-8 S- |
|
BlueBonnet | Standard | 1-88 2-88 3-107 4-0 5-0 H-8 S- |
|
BlueBonnet | Jumbo | 1-120 2-120 3-107 4-0 5-0 H-8 S- |
|
Canadian Production Wheel | Bobbin for CPW | 1-42 2-87 3-67 4-16 5-115 H-8 S- |
|
Canadian Production Wheel | Bobbin for CPW 3 | 1-42 2-86 3-62 4-15 5-110 H-8 S- |
|
Canadian Production Wheel | Bobbin for CPW 1 | 1-50 2-83 3-64 4-23 5-125 H-8 S- |
|
Canadian Production Wheel 10 | | 1-43 2-78 3-68 4-15 5-120 H-8 S-Holes 7,8 Round End Nub 3 |
|
Canadian Production Wheel 11 | | 1-42 2-72 3-61 4-14 5-113 H-7 S-Cone End |
|
Canadian Production Wheel 4 | | 1-44 2-87 3-64 4-18 5-118 H-8 S- |
|
Canadian Production Wheel 5 | | 1-40 2-70 3-60 4-20 5-123 H-9 S-Nub 2, Cone End, Thick Whorl |
|
Canadian Production Wheel 6 | | 1-38 2-83 3-60 4-15 5-120 H-8 S- |
|
Canadian Production Wheel 7 | J. Oulette | 1-47 2-82 3-65 4-17 5-109 H-7 S-Round End |
|
Canadian Production Wheel 8 | | 1-42 2-82 3-57 4-13 5-111 H-7 S-Cone |
|
Canadian Production Wheel 9 | | 1-45 2-80 3-60 4-15 5-119 H-7 S-Cone End |
|
Clemes & Clemes Modern Wheel | | 1-45 2-90 3-90 4-10 5-144 H-8 S-TCone |
|
Columbine | | 1-45 2-70 3-197 4-0 5-0 H-11 S- |
|
Columbine | Plying Bobbin | 1-45 2-95 3-197 4-0 5-0 H-11 S- |
|
Countess 1 | Peter Royle | 1-50 2-83 3-83 4-18 5-133 H-6 S-Cone End |
|
Countess 2 | Peter Royle | 1-50 2-86 3-81 4-18 5-133 H-6 S-Cone End |
|
Country Craftsman | J Franzek Jr | 1-38 2-73 3-70 4-20 5-113 H-8 S- |
|
Country Craftsman | Original J. Rooney | 1-40 2-70 3-60 4-20 5-104 H-7 S- |
|
Country Craftsman | Original J. Franzek | 1-40 2-73 3-73 4-25 5-113 H-8 S- |
|
Country Craftsman - 3 | CC Bobbin Strange Size | 1-38 2-104 3-70 4-20 5-110 H-7 S- |
|
Country Craftsman - 4 | | 1-31 2-70 3-70 4-20 5-110 H-8 S- |
|
Country Craftsman 5 | | 1-33 2-72 3-72 4-22 5-111 H-8 S-Cone |
|
Country Craftsman 6 | | 1-38 2-73 3-73 4-19 5-108 H-7 S-Cone |
|
Country Craftsman 7 | | 1-35 2-80 3-70 4-20 5-104 H-7 S-Cone End |
|
Country Craftsman 8 | | 1-40 2-100 3-70 4-22 5-164 H-7 S-Cone |
|
Country Craftsman 9 | | 1-32 2-67 3-59 4-20 5-109 H-7 S-Nub 3, Cone End |
|
Crofters Wheel | | 1-44 2-85 3-85 4-15 5-120 H-8 S- |
|
Daedalus | Starling Mini V1 | 1-32 2-98 3-98 4-101 5-0 H-9 S-(Diagram 3) Uses 688RS Bearings |
|
Daneker | | 1-36 2-52 3-52 4-13 5-94 H-7 S-Round End |
|
Doukhobor Wheel | | 1-54 2-73 3-65 4-16 5-111 H-8 S-Round End |
|
Dundas wheel | | 1-40 2-90 3-75 4-24 5-170 H-6 S- |
|
E. R. Oman | | 1-35 2-76 3-75 4-21 5-140 H-7 S- |
|
Easycraft Spinning Wheel | | 1-60 2-65 3-64 4-20 5-101 H-7 S-Cone |
|
Flyer 1 | Flyer Design 1 | 1-0 2-0 3-0 4-0 5-0 H-0 S- |
|
Flyer 2 | Flyer Design 2 | 1-0 2-0 3-0 4-0 5-0 H-0 S- |
|
Footman | Footman Prototype | 1-200 2-0 3-0 4-0 5-0 H-0 S- |
|
Frank Fell | | 1-64 2-87 3-62 4-19 5-109 H-7 S-W2=47, Round, Nubb 5 |
|
Frank Fell 2 | | 1-46 2-75 3-55 4-15 5-94 H-8 S-Whorl: 46,34,75,15 Nub 2, Holes 8,9 |
|
Frank Fell 3 | | 1-47 2-87 3-62 4-19 5-114 H-8 S-Orifice Hole=9, Whorl Hole=8, Nubb=5,Round |
|
Fricke | | 1-90 2-90 3-110 4-0 5-0 H-9 S-Use First Diagram |
|
German Wheel | Similar to a CPW | 1-62 2-71 3-52 4-18 5-95 H-8 S- |
|
Glaski Compact | | 1-59 2-59 3-54 4-10 5-90 H-6 S- |
|
Great Wheel Bobbin | | 1-88 2-88 3-95 4-0 5-0 H-7 S-Has a hole on the side of the end for a set screw. |
|
Haldane Hebridean | | 1-41 2-69 3-50 4-24 5-107 H-7 S-TCone2 End |
|
Haldane Hebridean | | 1-38 2-62 3-62 4-10 5-97 H-7 S-TCone |
|
Haldane Lewis | | 1-46 2-75 3-63 4-10 5-118 H-7 S-TCone |
|
Haldane Lewis | | 1-40 2-73 3-63 4-12 5-116 H-7 S-TCone |
|
Haldane Orkney | | 1-45 2-75 3-60 4-11 5-109 H-7 S-TCone |
|
Haldane Shetland | | 1-43 2-64 3-62 4-11 5-100 H-7 S-Round End |
|
Hansen | E-Spinner WW | 1-106 2-106 3-143 4-0 5-0 H-7 S-(left diagram) Gear_Diameter=22, Teeth=22 |
|
Hansen | E-Spinner | 1-108 2-108 3-146 4-0 5-0 H-7 S- |
|
Heavenly Handspinning | E-Spinner | 1-95 2-95 3-204 4-0 5-0 H-16 S-Uses 3/4 cpvc |
|
Homemade E-Spinner | | 1-80 2-114 3-148 4-0 5-0 H-8 S-Similar to Ashford Double Drive (5mm Nubb on orifice end) |
|
Homemade Wheel | Similar to an Ashford (Jumbo) | 1-38 2-51 3-127 4-120 5-0 H-7 S- |
|
Jensen | Wheel 3 | 1-57 2-82 3-50 4-15 5-100 H-7 S-Nub 2 |
|
Jensen | Wheel 3 | 1-56 2-97 3-73 4-14 5-124 H-7 S- |
|
Jensen | antique-style bobbin (1991 Jensen) | 1-62 2-104 3-75 4-14 5-122 H-7 S-Round End, Nubb 5 |
|
Kromski | Great Jumbo Bobbin | 1-50 2-146 3-82 4-200 5-0 H-8 S-Use Diagram on Right |
|
Kromski | Mazurka | 1-69 2-78 3-55 4-20 5-120 H-7 S- |
|
Kromski | Standard | 1-28 2-79 3-44 4-139 5-0 H-9 S-Right Diagram |
|
Leclerc | E350 Leclerc Reproduction Quebec Production | 1-40 2-76 3-54 4-16 5-117 H-10 S- |
|
Leclerc | #2 | 1-36 2-68 3-108 4-0 5-0 H-8 S-Diagram on Left |
|
Leclerc | E252 | 1-40 2-69 3-105 4-0 5-0 H-8 S-T1=7, T2=10 |
|
Lendrum | Plying Bobbin | 1-92 2-92 3-147 4-0 5-0 H-7 S- |
|
Lendrum | Saxony | 1-53 2-95 3-30 4-128 5-0 H-7 S-Diagram on right |
|
Lendrum | Standard 2 | 1-70 2-70 3-125 4-0 5-0 H-7 S- |
|
Lendrum | Standard | 1-70 2-83 3-125 4-0 5-0 H-7 S-Similar to Victoria |
|
Lendrum | WW Bobbin | 1-76 2-76 3-149 4-0 5-0 H-8 S-Diagram #1 |
|
Lil Finnish | | 1-37 2-58 3-51 4-13 5-75 H-7 S-Round End |
|
Lin Black Mud River | | 1-73 2-150 3-150 4-237 5-0 H-10 S- |
|
Lloyd Real | Double Drive | 1-44 2-88 3-80 4-17 5-120 H-8 S- |
|
Louet | S10 | 1-76 2-100 3-175 4-0 5-0 H-7 S- |
|
Louet | S60 | 1-108 2-76 3-159 4-0 5-0 H-8 S- |
|
Louet | Victoria, S10C | 1-73 2-73 3-124 4-0 5-0 H-9 S-One end is solid, the other end is a whorl |
|
Louet | S90 (3 Whorls) | 1-80 2-80 3-152 4-0 5-0 H-7 S-Whorls 80,55,34 |
|
Louet | Woolee Winder Bobbin | 1-64 2-48 3-83 4-173 5-0 H-7 S-Gear on both ends (t24, d20.6) |
|
Louet | S70 Bulky Bobbin | 1-127 2-127 3-170 4-0 5-0 H-7 S-Diagram on Left |
|
Louet | S17 | 1-95 2-95 3-175 4-0 5-0 H-7 S-Left Diagram, Whorls: 95mm,67mm, 50mm |
|
Louet | S70 / S71 | 1-104 2-74 3-176 4-0 5-0 H-7 S-3 Whorls 104, 89, 74 |
|
Louet | S51 | 1-95 2-95 3-165 4-0 5-0 H-0 S--Left Diagram, Whorls: 95mm,67mm, 50mm |
|
Louet | S10 (3 Speeds) | 1-90 2-124 3-175 4-0 5-0 H-7 S-Whorls (124, 100, 79) |
|
Majacraft | Woolee Winder | 1-86 2-86 3-110 4-0 5-0 H-8 S-Gear=21 Teeth=24 H2=3 |
|
Majacraft | Jumbo | 1-114 2-114 3-115 4-0 5-0 H-9 S- |
|
Majacraft | Standard | 1-88 2-88 3-116 4-0 5-0 H-8 S- |
|
Majacraft | Baby | 1-70 2-70 3-116 4-0 5-0 H-8 S-Solid Ends |
|
Merlin Tree | Hitchhiker | 1-72 2-73 3-114 4-0 5-0 H-7 S- |
|
Nilus Leclerc | | 1-38 2-71 3-0 4-105 5-0 H-8 S-Th1=7 TH2=10 -Diagram on right |
|
Norwegian Wheel 2 | Special Features | 1-45 2-70 3-57 4-13 5-98 H-6 S-Has a taper on the whorl end. |
|
Peacock Spinning Wheel | | 1-64 2-89 3-64 4-127 5-0 H-10 S- |
|
Pipy | New Zealand Wheel | 1-48 2-80 3-67 4-12 5-123 H-9 S- |
|
Rick Reeves | 19 inch Saxony | 1-50 2-92 3-60 4-11 5-112 H-8 S- |
|
Robin | | 1-101 2-83 3-179 4-0 5-0 H-7 S-3 Whorl Bobbin (83,67,53) |
|
Schacht | High Speed | 1-52 2-27 3-79 4-134 5-0 H-8 S- |
|
Schacht | Woolee Winder Jumbo | 1-115 2-115 3-150 4-0 5-0 H-8 S-Ends: 115,54 : 115,69 Hole 8.3 (21/64) |
|
Schacht | Jumbo | 1-115 2-69 3-115 4-54 5-150 H-8 S-Ends [115, 69], [115,54] Length 150 Hole 8.3 (21/64) |
|
Schacht | Standard Bobbin | 1-57 2-79 3-32 4-150 5-0 H-8 S-21/64 Hole |
|
Schacht | Woolee Winder Standard Bobbin | 1-76 2-57 3-76 4-32 5-150 H-8 S-Ends 76,57 76,32 Length: 150 |
|
Schacht Whorl | Extra Slow Speed Whorl | 1-150 2-133 3-0 4-0 5-0 H-0 S- |
|
Spinolution | Hook Orifice | 1-0 2-0 3-0 4-0 5-0 H-0 S- |
|
Spinolution | Tube Orifice - 16oz flyer. 4oz and 8oz are also available | 1-177 2-17 3-10 4-0 5-0 H-0 S- |
|
Spinolution | 16oz flyer bar tube oriface | 1-0 2-0 3-0 4-0 5-0 H-0 S- |
|
Spinolution | 16oz bobbin (Golden Whorl) | 1-150 2-150 3-155 4-0 5-0 H-10 S-25/64 Hole |
|
Spinolution | 4oz (Fits most 4oz flyers) | 1-73 2-73 3-112 4-0 5-0 H-7 S- |
|
Spinolution | 8oz Bobbin (Original) | 1-100 2-100 3-161 4-0 5-0 H-7 S- |
|
SpinWell Whorl | Whorl for s SpinWell Spinning Wheel | 1-0 2-0 3-0 4-0 5-0 H-0 S- |
|
Thumbelina | Made by Alex Baillie | 1-52 2-75 3-75 4-13 5-102 H-10 S-Round End |
|
Timbertops Sherwood | Saxony spinning wheel | 1-34 2-71 3-58 4-10 5-114 H-7 S-Round End |
|
Toika | | 1-49 2-63 3-46 4-25 5-105 H-7 S- |
|
Unknown Flax Wheel | | 1-52 2-72 3-63 4-15 5-112 H-6 S- |
|
Wee Peggy | Wheel 3 | 1-54 2-64 3-62 4-15 5-113 H-7 S-Round End |
|
Wee Peggy | Wheel 2 | 1-51 2-71 3-59 4-116 5-0 H-7 S-Similar to Kromski |
|
Wee Peggy | Wheel 1 | 1-62 2-62 3-110 4-0 5-0 H-7 S- |
|
Whorl | Whorl for an Antique Wheel | 1-47 2-50 3-19 4-0 5-0 H-6 S-Tapered hole so the whorl will press fit to the shaft. |
|